Engineer/Principal Engineer RF Microwave Design
Job Description
The qualified candidate will work with a diverse and talented team of engineers developing innovative and cost-effective systems that support a broad range of products and business areas across the lifecycle of a program. Applicants should possess the ability to communicate effectively and clearly present technical approaches and findings.
What you'll get to do:
Responsibilities may include Testing and Troubleshooting Line Replacement Units (LRU) of RF architecture, recommend data driven requirements threshold adjustments; perform subsystem analysis including hardware from RF to digits, support for performance testing, requirements verification, and more. Work is performed without appreciable direction and exercising considerable latitude in determining technical objectives of assignments
Experienced applicants will have at least a bachelor's degree in science or other related technical degree or have equivalent experience testing and troubleshooting, integration, designing, developing and/or testing radio frequency (RF) and/or microwave antenna systems and/or related RF hardware. Candidates would have the ability to troubleshoot complex problems which require the regular use of ingenuity and creativity.
In addition, this candidate should have demonstrated technical ability/leadership and expertise in one or more of the following areas:
• Wide Band Waveform Generator test and/or troubleshooting
• Phase Noise test and/or troubleshooting techniques
• RF and/or digital hardware test and/or troubleshooting
• Troubleshot electronic equipment to the component level.
• Integrated Receiver Exciter Assemblies (IREX)
• Highly integrated subsystems including receiver exciter hardware
• RF Performance Analysis
• Computational Electromagnetics, Statistics
• Subsystem Control Design
• RF Measurements and Data Reduction
• Integration and test of RF assemblies
• Subsystem requirements (hardware and software) derivation, flow-down, and configuration
• Comfortable creating test support applications and tools using MATLAB, python, etc.
• Experience with Atlassian Tool Suite, Git
• Active Interim Secret or higher clearance.
Basic Qualification for Engineer:
• Bachelors Degree in Engineering or related discipline with 2 years of experience in the areas described in the job description above. 0 years of experience with a Masters Degree. An additional 4 years of experience is acceptable in lieu of a degree.
• U.S. Citizenship is required.
• Ability to obtain and maintain a DoD secret clearance is required
• Demonstrate problem solving skills to a variety of RF/Microwave design and test related problems of increasing scope and complexity as assigned
• Proven knowledge of electrical engineering, design software and equipment
• Expertise Testing and Troubleshooting in a Manufacturing Environment
• Experience troubleshooting RF hardware/subsystems
Basic Qualifications for Principal Engineer:
• Bachelors Degree in Engineering or related discipline with 5 years of experience in the areas described in the job description above. 3 years of experience with a Masters Degree. An additional 4 years of experience is acceptable in lieu of a degree.
• U.S. Citizenship is required.
• Ability to obtain and maintain a DoD secret clearance is required
• Expertise Testing and Troubleshooting in a Manufacturing Environment
• Demonstrate problem solving skills to a variety of RF/Microwave design and test related problems of increasing scope and complexity as assigned
• Proven knowledge of electrical engineering, design software and equipment
• Expertise with troubleshooting RF hardware/subsystems
Preferred Qualifications
• A current Active DoD Secret Clearance.
• Experience Testing, Troubleshooting or designing RF hardware/subsystems
• Troubleshot electronic equipment to the component level.
• Experience with RF lab test equipment: signal generator, oscilloscope, spectrum analyzer, etc.
• Hands on experience in at least one type of these test set: Common RF Test Set (CRFTS), LM-STAR, Hiller Test sets, Phase Noise Test sets and consoles
• Experience troubleshooting and resolving HW/SW integration problems
• Experience with using or developing software to control hardware (such as MATE or AMAX)
• Experience with test scripting, data analysis, and/or signal processing
• Experience mentoring other design and/or RF test engineers
Primary Level Salary Range: $87,600.00 - $131,400.00Secondary Level Salary Range: $108,800.00 - $163,200.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit http://www.northropgrumman.com/EEO. U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
The qualified candidate will work with a diverse and talented team of engineers developing innovative and cost-effective systems that support a broad range of products and business areas across the lifecycle of a program. Applicants should possess the ability to communicate effectively and clearly present technical approaches and findings.
What you'll get to do:
Responsibilities may include Testing and Troubleshooting Line Replacement Units (LRU) of RF architecture, recommend data driven requirements threshold adjustments; perform subsystem analysis including hardware from RF to digits, support for performance testing, requirements verification, and more. Work is performed without appreciable direction and exercising considerable latitude in determining technical objectives of assignments
Experienced applicants will have at least a bachelor's degree in science or other related technical degree or have equivalent experience testing and troubleshooting, integration, designing, developing and/or testing radio frequency (RF) and/or microwave antenna systems and/or related RF hardware. Candidates would have the ability to troubleshoot complex problems which require the regular use of ingenuity and creativity.
In addition, this candidate should have demonstrated technical ability/leadership and expertise in one or more of the following areas:
• Wide Band Waveform Generator test and/or troubleshooting
• Phase Noise test and/or troubleshooting techniques
• RF and/or digital hardware test and/or troubleshooting
• Troubleshot electronic equipment to the component level.
• Integrated Receiver Exciter Assemblies (IREX)
• Highly integrated subsystems including receiver exciter hardware
• RF Performance Analysis
• Computational Electromagnetics, Statistics
• Subsystem Control Design
• RF Measurements and Data Reduction
• Integration and test of RF assemblies
• Subsystem requirements (hardware and software) derivation, flow-down, and configuration
• Comfortable creating test support applications and tools using MATLAB, python, etc.
• Experience with Atlassian Tool Suite, Git
• Active Interim Secret or higher clearance.
Basic Qualification for Engineer:
• Bachelors Degree in Engineering or related discipline with 2 years of experience in the areas described in the job description above. 0 years of experience with a Masters Degree. An additional 4 years of experience is acceptable in lieu of a degree.
• U.S. Citizenship is required.
• Ability to obtain and maintain a DoD secret clearance is required
• Demonstrate problem solving skills to a variety of RF/Microwave design and test related problems of increasing scope and complexity as assigned
• Proven knowledge of electrical engineering, design software and equipment
• Expertise Testing and Troubleshooting in a Manufacturing Environment
• Experience troubleshooting RF hardware/subsystems
Basic Qualifications for Principal Engineer:
• Bachelors Degree in Engineering or related discipline with 5 years of experience in the areas described in the job description above. 3 years of experience with a Masters Degree. An additional 4 years of experience is acceptable in lieu of a degree.
• U.S. Citizenship is required.
• Ability to obtain and maintain a DoD secret clearance is required
• Expertise Testing and Troubleshooting in a Manufacturing Environment
• Demonstrate problem solving skills to a variety of RF/Microwave design and test related problems of increasing scope and complexity as assigned
• Proven knowledge of electrical engineering, design software and equipment
• Expertise with troubleshooting RF hardware/subsystems
Preferred Qualifications
• A current Active DoD Secret Clearance.
• Experience Testing, Troubleshooting or designing RF hardware/subsystems
• Troubleshot electronic equipment to the component level.
• Experience with RF lab test equipment: signal generator, oscilloscope, spectrum analyzer, etc.
• Hands on experience in at least one type of these test set: Common RF Test Set (CRFTS), LM-STAR, Hiller Test sets, Phase Noise Test sets and consoles
• Experience troubleshooting and resolving HW/SW integration problems
• Experience with using or developing software to control hardware (such as MATE or AMAX)
• Experience with test scripting, data analysis, and/or signal processing
• Experience mentoring other design and/or RF test engineers
Primary Level Salary Range: $87,600.00 - $131,400.00Secondary Level Salary Range: $108,800.00 - $163,200.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit http://www.northropgrumman.com/EEO. U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
About Northrop Grumman
Northrop Grumman is a leading global aerospace and defense technology company. Our pioneering solutions equip out customers with the capabilities they need to connect and protect the world and push the boundaries of human exploration across the universe. Driven by a shared purpose to solve our customers’ toughest problems, our nearly 100,000 employees contribute to launching the technology of tomorrow, today.
© 2025 Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit http://www.northropgrumman.com/EEO. U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
Northrop Grumman would like you to finish the application on their website.